Pruning Saw with Disks HD

  • GRAECUS HD3 hydraulic pruning saw is compatible with LK, TK, MTK machines.
  • GRAECUS HD5 hydraulic pruning saw is compatible with BTK machines.
With the GRAECUS HD pruning saw you can easily cut branches up to 80 mm thick in seconds. The disc cutter bar is characterized by a smooth operation and a very clean cut, making it ideal for trimming bushes and trees. Note: Thick branches should always be cut from top to bottom to prevent the saw blades from jamming! It has 3/5 saw blades (72 teeth each) and a diameter of 400mm. The saw has an effective working width of approximately 900/1500mm. Carbide-tiped saw blades are hydraulically driven. A hydraulic oil supply of at least 40/70 l/min is required. Your attached vehicle must have a hydraulic control circuit with an oil drain line. (If a certain flow rate is exceeded, the oil returns directly to the oil drain line. Remember that the hydraulic motor and therefore the saw only works properly if all 3 lines – supply, return and also the oil drain line – are properly connected). V-belt power distribution ensures smooth operation of the saw blades. Depending on the circumstances and requirements, we recommend an operating speed of approximately 2 to 7 km/h.
Advantages and features
  • Highly hardened carbide discs 400mm.
  • Transmission with hydraulic motor and belts.
  • CE safety certificate.
Category: Tags: , , ,

GRAECUS HD hydraulic pruning saw is compatible with LK, TK, MTK and BTK machines.

With the GRAECUS HD disk saw you can easily cut branches up to 80 mm thick within seconds. The disc cutter bar is characterized by a smooth operation and a very clean cut, making it ideal for trimming bushes and trees. Note: Thick branches should always be cut from top to bottom to prevent the saw blades from jamming!

It has saw blades (72 teeth each) with a diameter of 400 mm. Carbide-tipped saw blades are hydraulically driven. Hydraulic oil supply required.

Your attached vehicle must have a hydraulic control circuit with an oil drain line. (If a certain flow rate is exceeded, the oil returns directly to the oil drain line. The hydraulic motor and the saw only work properly if all 3 lines – supply, return, and also the oil drain line – are properly connected). V-belt power distribution ensures smooth operation of the saw blades. Depending on the circumstances and requirements, we recommend an operating speed of approximately 2 to 7 km/h.